path: root/doc
diff options
authorAvatar Ciaran McCreesh <ciaran.mccreesh@googlemail.com> 2010-11-12 16:24:29 +0000
committerAvatar Ciaran McCreesh <ciaran.mccreesh@googlemail.com> 2010-11-12 16:24:29 +0000
commit60f7a0bd5384e5a0d89dcbf7266ae5ef656f81ef (patch)
treedb598bbeab44c4f16438d54397ccc50e7f0662fe /doc
parentc14b11bc5850fe1c7a02c72217e692f4f668a253 (diff)
Start documenting pbins
Diffstat (limited to 'doc')
5 files changed, 103 insertions, 3 deletions
diff --git a/doc/index.html.part.in b/doc/index.html.part.in
index d9566e012..170740052 100644
--- a/doc/index.html.part.in
+++ b/doc/index.html.part.in
@@ -23,6 +23,7 @@ the exheres repository format.</p>
<li><a href="overview/features.html">Features</a>: an overview of Paludis, and how it differs from its predecessor,
<li><a href="overview/gettingstarted.html">Getting started</a>: where to begin.</li>
+ <li><a href="overview/pbins.html">Pbins</a>: how to work with binary packages.</li>
<li><a href="overview/contact.html">Contact</a>: how to get in touch.</li>
diff --git a/doc/overview/Makefile.am b/doc/overview/Makefile.am
index bbbad9e16..7b602d7b5 100644
--- a/doc/overview/Makefile.am
+++ b/doc/overview/Makefile.am
@@ -9,6 +9,7 @@ CLEANFILES += \
features.html \
gettingstarted.html \
contact.html \
+ pbins.html \
@@ -16,6 +17,7 @@ EXTRA_DIST = \
index.html.part \
features.html.part \
gettingstarted.html.part \
+ pbins.html.part \
paludisoverviewhtmldir = $(htmldir)/overview
@@ -24,7 +26,8 @@ paludisoverviewhtml_DATA = \
index.html \
features.html \
gettingstarted.html \
- contact.html
+ contact.html \
+ pbins.html
@@ -45,6 +48,9 @@ features.html : header.html.part $(srcdir)/features.html.part footer.html.part
contact.html : header.html.part $(srcdir)/contact.html.part footer.html.part
cat header.html.part $(srcdir)/contact.html.part footer.html.part > $@
+pbins.html : header.html.part $(srcdir)/pbins.html.part footer.html.part
+ cat header.html.part $(srcdir)/pbins.html.part footer.html.part > $@
header.html.part : $(srcdir)/../header.html.part.in toplinks.html.part
sed \
-e 's,###TOPURI###,../,g' \
diff --git a/doc/overview/index.html.part b/doc/overview/index.html.part
index 66f47fca0..d9f3f3971 100644
--- a/doc/overview/index.html.part
+++ b/doc/overview/index.html.part
@@ -6,6 +6,7 @@
<li><a href="features.html">Features</a>: an overview of Paludis, and how it differs from its predecessor,
<li><a href="gettingstarted.html">Getting started</a>: where to begin.</li>
+ <li><a href="pbins.html">Pbins</a>: how to work with binary packages.</li>
<li><a href="contact.html">Contact</a>: how to get in touch.</li>
diff --git a/doc/overview/pbins.html.part b/doc/overview/pbins.html.part
new file mode 100644
index 000000000..bcc04bace
--- /dev/null
+++ b/doc/overview/pbins.html.part
@@ -0,0 +1,92 @@
+<!-- vim: set tw=120 ft=html sw=4 sts=4 et : -->
+<div class="note">
+ <p>Binary package support is currently extremely experimental. <strong>Be sure to read this entire document
+ carefully</strong> and be aware that you will encounter bugs, some of which <strong>may leave your system
+ unbootable or broken beyond repair</strong>.</p>
+<h2>Format Overview</h2>
+<p>Paludis uses its own format for binary packages built from ebuild or exhereses. This format is known as 'pbin'. It is
+not in any way compatible with Portage's tbz2 packages, which we consider to be too broken to be worth handling.</p>
+<p>A pbin comes in two parts. First, there is the pbin file itself, which is a small file containing metadata
+information. Second, there is the tarball containing the content of the package, along with environment information to
+allow pre- and post-install functions to be run as if the package were being installed from source.</p>
+<p>pbin files should be considered to be more or less like an ebuild or exheres -- in particular, they are kept in a
+repository, which can be shared and synced using the normal mechanisms. There is nothing special about repositories that
+contain binary packages, and it is in principle possible to mix binary and source packages within an individual
+repository (although doing so is a bad idea).</p>
+<p>Similarly, the content tarball is treated just like source tarballs for ebuilds and exhereses. It is stored in a
+distfiles directory rather than in the repository, and can be fetched from a remote location (which might be mirrored)
+when it is required.</p>
+<p>Using a binary repository is just like using a normal ebuild or exheres repository, and does not require any special
+configuration. The <code>importance</code> setting may be of interest here, however -- using a high importance for a
+binary repository will result in packages in that repository being preferred, whilst using a low importance will result
+in binaries only being used when necessary or explicitly requested.</p>
+<h2>Notes on <code>libarchive</code></h2>
+<p>We use <a href="http://code.google.com/p/libarchive/">libarchive</a> to create binary packages. At the time of
+writing (libarchive 2.8.4), this is causing a number of issues (but not as many as using anything else would do...). In
+ <li>It is strongly recommended that <strong>libarchive be built without support for extended attributes
+ (xattrs)</strong>. Some users have found that binary packages cannot be created when extended attribute support
+ is enabled (error messages like <code>archive_read_disk_entry_from_file failed</code>).</li>
+ <li>Current releases of libarchive do not support GNU's tar extensions (although svn master does). However, without
+ extensions, tar is effectively useless. Thus, if the version of ilbarchive installed when Paludis is built does not
+ have GNU tar support, we use POSIX pax format when creating tarballs, and we use the <code>.pax</code> extension
+ rather than <code>.tar</code> to make this clear. Unfortunately, <strong>GNU tar doesn't particularly like PAX
+ tarballs</strong>, and will moan like crazy and not properly extract files built this way. Thus, if you intend
+ to extract pbin tarballs by hand (e.g. to rescue a completely broken system), you must either use OpenBSD's
+ <code>pax</code> to do the extracting, or use a libarchive release that does not yet exist.</li>
+<h2>Creating Binary Repositories</h2>
+<p>If one wishes to <em>create</em> binary packages, either for local use or for distribution, then some additional
+configuration is required. In general:</p>
+ <li>Create a new, empty repository, exactly as you would for an overlay containing ebuilds or a supplementary
+ repository containing exhereses. Give it a name, like <code>fred-bin</code>. Configure Paludis to use this
+ repository as normal.</li>
+ <li>In addition, specify keys like the following in the configuration file (see <a
+ href="../configuration/repositories/e.html">the e repository documentation</a> for full details):
+ <pre>binary_destination = true
+binary_distdir = ${distdir}
+binary_keywords_filter = amd64 ~amd64</pre>
+ </li>
+ <li>If your binary repository is intended for non-local use, you may wish to use a different directory for
+ <code>binary_distdir</code>, to make distributing generated tarballs simpler. In this case, you should also specify
+ <code>binary_uri_prefix = http://yourserver/wherever</code> (or <code>mirror://yourname/</code> and then also set up
+ a <code>thirdpartymirrors</code> (Gentoo) or <code>mirrors.conf</code> (Exherbo) as part of your repository.</li>
+<h2>Creating Binary Packages</h2>
+<p>Creating binary packages is done for two reasons.</p>
+ <li>Creating binary packages may be a direct goal, either for local use or for publishing. In this case, <code>cave
+ resolve --make binaries</code> can be used. The <code>--make-dependencies</code> option will likely also be of
+ interest.</li>
+ <li>Creating binary packages may be a desired side effect, either to avoid building a package twice to install to
+ slash and a chroot, or just to have something around for possible use when installing a package normally. In this
+ case, <code>cave resolve --via-binary</code> is a more appropriate solution.</li>
+<p>Creating binaries using the old <code>paludis</code> client is not recommended, since it is not aware of the
+subtleties of dependencies with binary packages.</p>
diff --git a/doc/overview/toplinks.html.part.in b/doc/overview/toplinks.html.part.in
index e2629b47b..9486da7fc 100644
--- a/doc/overview/toplinks.html.part.in
+++ b/doc/overview/toplinks.html.part.in
@@ -34,7 +34,7 @@
<td class="currentpage">
- <a href="###TOPURI###overview/contact.html">Contact</a>
+ <a href="###TOPURI###overview/pbins.html">Pbins</a>
@@ -44,7 +44,7 @@
<td class="currentpage">
- &nbsp;
+ <a href="###TOPURI###overview/contact.html">Contact</a>